总述

I. Overview

1.无需手动进样、无需手动测量、无需手动清洗、无需人员看管；

1.No hand injection, no manual measurement, no manual cleaning, no person keeping

2.更高效、更稳定、更经济、更安全；

2. More efficient, more stable, more economic and more secure

二．产品特点

II. Product characteristics

 1、具有全自动进样、全自动测试、全自动清洗、全方位多通道恒温干燥及浸泡等功能；

1. It has the function of full-automatic hand injection, full-automatic measurement, full-automatic washing, all-round multi-channel constant temperature drying and soaking.

2、满足测量各种颜色的牛顿液体样品；

2. Various colors Newtonian liquid sample for measurement

3、进样仓具有恒温控制，保证样品不受外界温度变化的影响（如PET测试中的苯酚四氯乙烷溶剂在低于22℃会结晶分层）；

3. The thermostatical control in the injection chamber ensures that the sample is not affected by external temperature changes(Phenol tetrachloroethane solvent in PET test will have crystallization stratification phenomenon at the temperature lower than 22℃.)

4、独特的干燥方式，在保证干燥效果及效率的前提下，可采用更环保、更安全的干燥试剂进行干燥；

4. Unique drying method. More environmental and secure drying agent can be used for drying under the precondition of guaranteeing the drying effect and efficiency.

5、废液分类收集功能，可避免不良化学反应发生的同时，有利于废液的处理及回收再利用；

5. Waste liquid classification and collection function can avoid the adverse chemical reactions and is beneficial to the treatment and recycling of waste liquid.

6、极其强大的V4.0版卓祥AVM全自动粘度测量软件功能

6. Powerful V4.0 ZVISCO AVM full-automatic viscosity measurement software function

6.1客户可根据自身需求，最终得出相应单位制的结果，例如流出时间和它们的平均值、标准/绝对/百分比偏差、动能校正、运动粘度、动力粘度、相对粘度、比浓粘度（粘数）、特性粘度（极限粘数）、根据Fickentscher的K值、聚合度、粘均分子量；

6.1 Customers can get the result of corresponding unit system according to their demands, such as the outflow time, average value, standard/absolute/percentage deviation, kinetic energy correction, kinematic viscosity, dynamic viscosity, relative viscosity, reduced viscosity(viscosity number), intrinsic viscosity(limiting viscosity number), Fickentscher's K value, degree of polymerization, viscosity-average molecular weight.

6.2软件包含多种国际上通用的粘度公式可选：

6.Software contains a variety of common international viscosity formula.

6.2.1单一点法（苏尔兹-布拉施克式；哈根斯式；所罗门-休塔式；比尔梅耶式；马龙式；马丁式等）；

6.2.1 Single point method(Schulz-Blaschke, Huggins, Solomon-Ciuta, Bilmeyer, Malone, Martin, etc)

6.2.2平行外推法及串行外推法；

6.2.2 Parallel extrapolation and serial extrapolation

6.3主机与PC端的连接方式只需要一根RS232串口线；

6.3 The main engine is connected to PC terminal by one RS232 null modem cable

6.4启动后无需看管，数据智能判别，如有测量数据不符设定要求，具有自动补测功能；

6.4 There is no need for guaranteeing after startup and the data will have intelligent discrimination. If the measured data are not in conformity with the setup requirements, it will have auto supplementary measurement function.

6.5具有权限等级管理功能，确保实验重要数据不被随意修改，数据可查询、预览、PDF导出、打印、统计等功能。

6.5 Privilege level management function ensures that the important experimental data cannot be modified at random with query, preview, PDF derivation, printing, statistics and other functions.

三．仪器主要技术参数

III. Main technical parameters